4CH Penta-brid 1080N/720P Cooper 1U 1HDD WizSense Digital Video Recorder

* The information below only applies to hardware version 2.0 of the product.

> 4-channel SMD Plus for analog channels which allows the device to trigger accurate alarms for humans and vehicles.

> 4-channel AI Coding saves on storage and bandwidth while maintaining the details of targets in videos.

> Supports HDCVI, AHD, TVI, CVBS and IP video input.

> Supports up to 5-channel IP camera input and each channel can be up to 2 MP. The incoming bandwidth reaches 20 Mbps.

> Smart H.265+ and H.265 dual-stream video compression.

5MP Starlight HDCVI IR Bullet Camera

* The parameters and datasheets below can only be applied to 2501-S2 series.

* In order to use the 5MP 16:9 HDCVI camera, the firmware of XVR must be upgraded to V4.001.0000001.0.R.200908 or later version.

> Max 25 fps@5MP (16:9 video output)
> Starlight, 120 dB true WDR, 3D NR
> CVI/CVBS/AHD/TVI switchable
> 3.6 mm fixed lens (2.8 mm, 6 mm optional)
> Built-in mic
> Max. IR length 40 m, Smart IR
> IP67, DC12V±30%

64/128 Channel 2U 8HDDs Ultra series Network Video Recorder

> New 4.0 user interface
> 16-channel decoding@1080p (30 fps); self-adaptive decoding capability
> Access, storage or forwarding at 384 Mbps
> Simultaneous video output for VGA and HDMI1; 4K heterogeneous output for the 2 HDMI ports
> Supports RAID 0/1/5/10Multiple data mode such as Raid0, Raid1, Raid5, Raid6, and Raid10
> Remote configuration and management of IPCs, such as setting pa rameters, acquiring information and upgrading IPCs of the same model in batches

> AI-by-camera functions such as perimeter protection, face detection and recognition, SMD Plus, video metadata, ANPR and 3D behavior analysis
> N+M cluster. When the host fails, the standbydevice will continue to record; once the host recovers,video recorded on the standby device will be transmitted back

32 Channel 2U 8HDDs Ultra series Network Video Recorder

> New 4.0 user interface

> 16-channel decoding@1080p (30 fps); self-adaptive decoding capability

> Access, storage or forwarding at 384 Mbps

> Simultaneous video output for VGA and HDMI1; 4K heterogeneous output for the 2 HDMI ports

> Multiple data mode such as Raid0, Raid1, Raid5, Raid6, and Raid10

> Remote configuration and management of IPCs, such as setting pa rameters, acquiring information and upgrading IPCs of the same model in batches

> AI-by-camera functions such as perimeter protection, face detection and recognition, SMD Plus, video metadata, ANPR and 3D behavior analysis

> N+M cluster. When the host fails, the standbydevice will continue to record; once the host recovers,video recorded on the standby device will be transmitted back

5MP WizMind IR Fisheye Network CAMERA

> 5MP, 1/2.7” CMOS image sensor, low illuminance, high image definition

> Outputs max. 5MP (2592 × 1944) @25/30 fps

> H.265 codec, high compression rate, ultra-low bit rate

> Built-in efficient IR illuminator, and the max. illumination distance: 10 m

> ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments

> 120dB WDR, 3D DNR, HLC, BLC, digital watermarking, applicable to various monitoring scenes

> Intelligent detection: Intrusion, tripwire, people counting in area

> Abnormality detection: Motion detection, video tampering, scene changing, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, and voltage detection

> Alarm: 1 in, 1 out; audio: 1 in, 1 out; supports max. 256 G Micro SD card, built-in Mic

> 12V DC/PoE power supply, easy for installation

> Heat map for people counting. You can adjust the number of people, time threshold to generate a heat map, which can be exported.

2MP 12x Starlight IR PTZ Network Camera

> 1/2.8” 2Megapixel STARVIS™ CMOS
> Powerful 12x optical zoom
> Starlight technology
> Max.25/30fps@1080P
> IVS
> Support PoE+
> IR distance up to 100m
> IP66

4K Starlight HDCVI Fixed IR Bullet Camera

* The parameters and datasheets below can only be applied to 1801-S2 series

> Max. 15 fps@4K.

> 120 dB true WDR, 3D NR.
> Smart IR Illumination.
> 40 m illumination distance.
> Super Adapt.
> 3.6 mm fixed lens (2.8/6 mm optional).
> CVI/CVBS/AHD/TVI switchable.
> IP67, 12 VDC.

UBIQUITI Access point

USB fingerprint scanner and card issue device that provides a simple and efficient way to register user fingerprints and card numbers with ZKTeco Software

4 Channel Compact 1U 1HDD 4PoE Network Video Recorder

> New 4.0 user interface, Security baseline 2.1

> H.264, H.265, Smart H.264+, and Smart H.265+. H.265 auto switch

> Max. decoding capability: 8 × 1080p@30 fps. Supports adaptive decoding

> Supports mainstream cameras of ONVIF and RTSP protocols

> P2P remote surveillance, video play on mobile device

> VGA/HDMI simultaneous video output, maximum resolution of HDMI is 4K

> AI by Camera: Face detection, perimeter protection, IVS, people counting, heat map, and SMD

> Supports remote configuration and management of IPC, such as set ting parameters, getting information, and upgrading IPC of the same model in batches

3000FACE-3000F.P-10000RFID-PASSWORD- معاملة100000